2010

T. T. Öpöz, B. Ekmekçi, A. Erden, "An Experimental Study on the Geometry of Micro Holes in Electric Discharge Machining" (Micro-EDM), Materials and Manufacturing Processes Journal, v. 3, 2010 (in print).

2009

T. T. Öpöz, B. Ekmekçi, A. Erden, "Micro Electrical Discharge Machining for Manufacturing of Micro Components", (submitted for consideration).

B. Ekmekçi, A. Sayar, T.T. Öpöz, A. Erden, "Geometry and Surface Damage in Micro Electric Discharge Machining of Micro Holes", (submitted for consideration).

2008

T.T. Öpöz, B. Ekmekçi, A. Erden, “Micro Electrical Discharge Machining for Manufacturing of Micro Components”, 11th Mechatronics Forum Biennial International Conference, June 2008, Limerick, Ireland.

B. Ekmekçi, A. Sayar A., Öpöz T.T., A. Erden, “Characteristics of Surface Damage in Micro Electric Discharge Machining of Micro Holes”, Proc.  Advances in Materials and Manufacturing Technologies, Bahrain, 2008.

T. T. Öpöz, B. Ekmekçi, A. Erden, "An Experimental Study on the Geometry of Micro Holes in Electric Discharge Machining (Micro-EDM)”, The 13th International Conference on Machine Design and Production, September 2008, İstanbul, Turkey.

A. Konez Eroğlu, A. Erden, M. Akkök, "Development of a new Artificial Muscle for a Grasshopper-like Jumping Mechanism", The 13th International Conference on Machine Design and Production, September 2008, İstanbul, Turkey.

2006

B. Ekmekçi, E. Tekkaya, A. Erden, “A Semi-emprical Approach for Residual Stresses in Electric Discharge Machining (EDM)”, International Journal of Machine Tools and Manufacture, 46: pp. 858-868, 2006.

A. Erden, T.T. Öpöz, B. Ekmekçi, O. Elkoca, S. Halkacı, "Manufacturing of Smaller Holes by using Micro-Electrical Discharge Machining (Micro-EDM)", The 12th International Conference on Machine Design and Production, Proceeding pp. 859-869, September 2006, Kuşadası, Turkey.

2005

B. Ekmekçi, O. Elkoca, A.E. Tekkaya, A. Erden, “Residual Stress State and Hardness Depth in Electric Discharge Machining: De-ionized Water as Dielectric Liquid”, Machine Science and Technology, Vol. 9, pp. 39–61, 2005.

B. Ekmekçi, O. Elkoca, A. Erden, “A Comparative Study on the Surface Integrity of Plastic Mold Steel due to Electric Discharge Machining”, Metallurgical and Materials Transactions B, Vol. 36B, pp. 117-124, 2005.

2004

B. Ekmekçi, A. Erden, "Remarks On Surface Integrity Of Electric Discharge Machined Surfaces: A State of Art Review", Proc. The Eleventh International Conference on Machine Design and Production, 13 - 15 October 2004, Antalya, Turkey.

B. Ekmekçi, N. Ekmekçi, A. E. Tekkaya, A. Erden, "Residual Stress Measurement With Layer Removal Method", Proceedings of the First Cappadocia International Mechanical Engineering Symposium, 14-16 July 2004, Cappadocia, Turkey.

B. Ekmekci, O. Elkoca, A. Erden, “A Comparative Study on the Surface Integrity of Plastic Mold Steel due to Electric Discharge Machining”, Metallurgical and Materials Transactions B, Volume 35b, 2004.

B. Ekmekci, O. Elkoca, A.E. Tekkaya, A. Erden, “Residual Stress State and Hardness Depth in Electric Discharge Machining: De-Ionized Water as Dielectric Liquid”, Machining Science and Technology, 2004.

2003

B. Ekmekçi, O. Elkoca, A.E. Tekkaya and A. Erden, “Residual Stress State in Electrical Discharge Machined Surface of Plastic Mold Steel with De-Ionized Water as Dielectric Fluid”, Proceedings of AMPT2003, 8-11 July 2003, Dublin, Ireland.

2002

H. S. Halkacı, A. Erden, "Experimental Investigation of Surface Roughness in Electric Discharge Machining (EDM).", 6th Biennial Conference on Engineering Systems Design and Analysis (ESDA) 2002, Istanbul, Turkey, July 8-11, 2002.

B. Ekmekçi, A.E. Tekkaya, A. Erden, "Investigation of Residual Stresses on Electrical Discharged Machined Surfaces.", 6th Biennial Conference on Engineering Systems Design and Analysis (ESDA) 2002, Istanbul, Turkey, July 8-11, 2002.

B. Ekmekçi, O. Elkoca, F. Koltuk, A.E. Tekkaya, A. Erden, "Metallurgical Properties of Electric Discharge Machined Surfaces", 6th Biennial Conference on Engineering Systems Design and Analysis (ESDA) 2002, Istanbul, Turkey, July 8-11, 2002.

B. Ekmekçi, O. Elkoca, A.E. Tekkaya, A. Erden, "Observation on Cracking Behavior of Micro Alloy Steel in Electric Discharge Machining (EDM)", 6th Biennial Conference on Engineering Systems Design and Analysis (ESDA) 2002, Istanbul, Turkey, July 8-11, 2002.

2001

Halkacı H. S., Erden A. Selçuk Üniversitesinde Elektro-Erozyon (EDM) Konusundaki Deneysel Çalışmalar, TMMOB MMO, Makina Tasarım ve İmalat Teknolojileri Kongresi, Konya, Kasım 2001.

1997

Erden A., "Non-Traditional Machining Processes", Handbook of Mechanical Engineering, 2nd Edition, Vol. 2 (Design and Production), Section 15, 53p., The Turkish Chamber of Mechanical Engineers, Publ. No: 170, 1997 Ankara, (In Turkish).

1995

Erden A., Arınç F., and Kögmen M., “Comparison of Mathematical Models for Electric Discharge Machining”, J. of Materials Processing and Manufacturing Science, Vol 4. No 2 pp 163-176, 1995.

1993

Erden A., "Investigations on the Discharge Channel in Electric Discharge Machining", Modeling, Measurement and Control, A, Vol. 49 No. 3, 1993, pp. 39-51.

1992

Erden A., Arınç F., "A Mathematical Model for Tool and Workpiece Shape Degeneration in Electric Discharge Machining (EDM) ", Doğa-Tr. J. Engineering and Environmental Sciences, Vol. 16, pp. 161-168, 1992.

1987

Erden A., "Investigation on The Role of Dielectric Fluid Velocity in EDM", Proceedings, The 2nd Int. Ain-Shams Uni. Conf. Prod. Eng. and Des. for Development, Cairo, 1987, pp.769-776.

Çoğun C., Erden A., "High Speed Pulse Discrimination in EDM by Using Voltage Pulse Trains" Proceedings, The 2nd Int. Ain-shams Uni. Conf. Prod. Eng. and Des. for Development, Cairo, 1987, p.777-785

Çoğun C., Erden A., "Computer Aided Control of Electric Discharge Machining", J. Machine Design and Production, Vol. 1, No. 5, October 1987, pp. 206-212, (In Turkish)

1986

Darendeliler H., Çoğun C., Erden A., "Determination of  Experiment Sample size in E. D. M.", 2nd National Machine Design and Production Conference, METU, Ankara, 1986, pp.141-151, (In Turkish)

Çoğun C., Erden A., " Computer Aided Control of Electric Discharge Machining.", 2nd National Machine Design and Production Conference, METU, Ankara, 1986, pp.105-112, (In Turkish)

Çoğun C., Erden A., " Design and Construction of a High Speed Pulse Discriminator for Electric Discharge Machining.", J. Machine Design and Production, Vol. 1, No. 1, September 1986, pp. 38-42, (In Turkish)

1985

Çoğun C., Erden A., "Correlation between Pulse Train Characteristics and Machining Parameters in Electric Discharge Machining", Proc. Int. Symposium on Measurement and Control (MECO'85), 1985, pp. 114-120.

Çoğun C., Erden A., "Statistical Investigation and Modeling of Pulse Trains in Electric Discharge Machining ", Doğa, Seri B, Vol. 9, No. 2, 1985, pp.149-161, (In Turkish)

1984

Erdoğan B., Gülersoy G., Erden A., "Development of a Metal Spraying Unit and its Industrial Applications", Proceedings, 1st National Machine Design and Production Conference, METU, Ankara, 1984, pp. 405-412, (In Turkish)

Çoğun C., Erden A., "Wire Electrochemical Machining", Proceedings, 1st National Machine Design and Production Conference, METU, Ankara, 1984, pp.429-436, (In Turkish)

Ardalı T., Erden A., "Wire Electric Discharge Machining and Industrial Applications", Proceedings, 1st National Machine Design and Production Conference, METU, Ankara, 1984, pp. 437-442, (In Turkish)

Çoğun C., Erden A., "Effect of Pause Time on Properties of Pulse Trains in Electric Discharge Machining", METU Journal of Pure and Applied Sciences, Vol. 17, No. 3, Dec. 1984, pp. 191-208

1983

Erden A., "Effect of Materials on the Mechanism of Electric Discharge Machining (EDM)", Transactions of the ASME, Journal of Engineering Materials and Technology, Vol. 105, No. 2, pp. 132-138, 1983

Erden A., "Ultrasonic Machining (USM)" J. METU Appl. Res., Vol. 3, No 9, Suppl., 22 p., 1983, (In Turkish)

Erden A., "Abrasive Jet Machining (AJM)", Mühendis ve Makina , Vol. 24, No. 289, December, 1983, s.4-9, (In Turkish)

Çoğun C., Erden A., Türkvan H., "Design and Application of a Digital Time-Lag Counter to Investigate Characteristics of Pulse Trains in EDM", Proceedings, 24th Machine Tool Design and Research Conference, pp.311-316, Manchester, 1983

Erden A., Çoğun C., " Design and Production of a Digital Time-lag Counter to Investigate Pulse Trains in EDM", 1983. TÜBİTAK Project No: MAG-608, Ankara, 1983, 51 p., (In Turkish)

1982

Erden A., "Role of Dielectric Flushing on Electric Discharge Machining Performance", Proceedings, 23rd Machine Tool Design and Research Conference, pp.283-289, U.M.I.S.T., Manchester, 1982

Erden A., "Investigations on Pulse Trains in Electric Discharge Machining", J. Pure and Applied Sciences, METU, vol. 15, no. 1, pp. 17-33, 1982

1981

Erden A., Kaftanoğlu, B., "Thermomathematical Modeling and Optimization of Energy Pulse Forms in Electric Discharge Machining (EDM)”, Int. J. Mach. Tool Des. Res. Vol. 21 No. 1, pp. 11-22, 1981.

Erden A., Temel, D., "Investigation on the Use of Water as a Dielectric Liquid in Electric Discharge Machining", Proceedings, 22nd Machine Tool Design and Research Conference, pp. 437-440, U.M.I.S.T. Manchester, 1981

Erden A., "Experimental Investigation of the Effect of dielectric Fluid Flushing on the Machining Performance in Electric Discharge Machining", METU Dissertation, 158p. September 1981, (In Turkish)

1980

Erden A., Kaftanoğlu, B., "Investigations on Breakdown Phase of Sparks in EDM", J. Pure and Applied Sciences, METU, Vol. 13, No. 1, pp. 45-74, 1980

Erden A., Kaftanoğlu, B., "Heat Transfer Modeling of Electric Discharge Machining", Proceedings, 21st Machine Tool Design and Research Conference, Swansea, pp. 351-358, 1980

Erden A., Bilgin, S., "Role of Impurities in Electric Discharge Machining", Proceedings, 21st Machine Tool Design and Research Conference, Swansea, pp. 345-350, 1980

Erden A., "Investigation on the Pulse Trains in EDM", Proceedings, TÜBİTAK VII. Science Congress pp.331-340, Kuşadası, 1980, (In Turkish)

Erden A., "Non-Traditional Machining Methods in Die Manufacturing", SEGEM, Publ. No. 59, 55p., Ankara, 1980, (In Turkish)

1977

Erden A., " Aerospace Industry and Non-Traditional Machining Processes ", Kartal No.36, July-Aug. 1977, pp. 4-7,27 Ankara(In Turkish)

Erden A., "Theoretical and Experimental Investigation on Electric Discharge Machining", Ph.D. Thesis, 1977, METU, Ankara, 274 s.

Erden A., Kaftanoğlu, B., "Thermodynamic Modeling of EDM", Proceedings, TÜBÝTAK 6th Science Congress, October 1977, Izmir, pp. 257-271, (In Turkish)

Gülersoy, G., Erden A., "Use of Sprayed Electrodes in EDM", 1st Scientific and Technical Conference, December 1977, Ankara, 9p. (In Turkish)

1976

Erden A., "Non-Traditional Machining Processes", Handbook of Mechanical Engineering, Vol. 2, section 8.6, pp. 885-929, The Turkish Chamber of Mechanical Engineers, 1976 Ankara, (In Turkish)

Erden A., " Non-Traditional Machining Processes", IYSE-MKE Seminar Notes, 1976, 17p. (In Turkish)

1975

Erden A., "A Comparison of Non-Traditional Machining Processes", Mühendis ve Makina, Vol. 19, n. 219, pp. 135-141, April, 1975, (In Turkish)

Erden A., "Electric Discharge Machining", Mühendis ve Makina, Vol. 119, No. 220, pp. 151-158, May 1975, (In Turkish)

Erden A., Kaftanoğlu, B., "Thermomathematical Modeling of EDM", Proceedings, TÜBİTAK 5th Science Congress, pp. 349-364, October 1975. Istanbul, (In Turkish)

1973

Erden A., Kaftanoğlu, B., "An Appraisal on Electric Discharge Machining", METU Mech. Eng. Dept. Report., Ankara, 1973, 101p.